1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Cleaning »
4. Cleaning Concrete Tiles »
5. _What_are_the_reasons_for_considering_the_stripping_of_concrete_floors

Frequently Asked Questions

Q: What are the reasons for considering the stripping of concrete floors? - Tile and Grout Cleaning | Cleaning Concrete Tiles

• A: Stripping concrete floors is essential if you desire the cleanest and most visually appealing results. By entrusting the task to professionals, they can effectively remove as much of the old sealer as possible. This initial step paves the way for a thorough cleaning process before applying a new sealer. The end result is a fresh and immaculate polished concrete floor that showcases its natural beauty to the fullest extent. With professional stripping, cleaning, and sealing, your concrete floors can achieve their optimal appearance and maintain their pristine condition.

Other FAQs :

• Q: Is it possible to apply penetrating concrete sealers over existing topical sealers?
• A: No, it is not possible to apply penetrating concrete sealers over existing topical sealers. Topical sealers create a membrane or film on the surface of the concrete, forming a barrier that prevents the penetrating sealers from effectively absorbing into the concrete. Therefore, before applying a penetrating sealer, it is necessary to remove any existing topical sealer to ensure proper penetration and adhesion of the new sealer. This preparation step ensures that the penetrating sealer can effectively provide the desired protection and enhance the durability of the concrete surface.
• Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage?
• A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.
• Q: Does sealing concrete surfaces help prevent efflorescence?
• A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.
• Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
• Q: What is the recommended method for cleaning polished concrete surfaces?
• A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.

For More Questions

FAQs » Tile and Grout Cleaning » Cleaning Concrete Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software