1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Cleaning »
4. Cleaning Concrete Tiles »
5. What_are_the_indicators_that_suggest_it_is_time_to_clean,_strip,_and_reseal_polished_concrete_surfaces

Frequently Asked Questions

Q: What are the indicators that suggest it is time to clean, strip, and reseal polished concrete surfaces? - Tile and Grout Cleaning | Cleaning Concrete Tiles

• A: You will know it's time to have your concrete floors stripped, cleaned and sealed once they begin to appear dull or "matte" even after you have given them an efficient regular clean. If you notice that your concrete surfaces are staining easily, it's a good indication that your previous sealer is wearing off and your concrete floors will need to be resealed immediately to prevent permanent staining.

Other FAQs :

• Q: Can Tile Cleaners remove efflorescence buildup from concrete surfaces?
• A: Certainly! Tile Cleaners has the expertise to remove efflorescence from concrete surfaces. Efflorescence, which is the buildup of salts, can be effectively treated using specialized cleaning techniques and efflorescence removers. It is crucial to address the underlying cause of efflorescence, which is often a leak behind the concrete or damaged grout lines. While efflorescence can be removed, it is essential to resolve the root cause to prevent its recurrence. By engaging professional services, you can have the efflorescence removed and ensure that steps are taken to rectify the underlying issue, helping to restore the appearance of your concrete surfaces.
• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: Are there any safety concerns associated with the process of stripping and sealing concrete?
• A: Yes, the concrete stripping and sealing process conducted by Tile Cleaners® is safe. Our tile cleaning services prioritize the use of high-quality, water-based products that are safe for your concrete surfaces. Additionally, we utilize advanced cleaning machinery and techniques to ensure effective cleaning without compromising the integrity or safety of the concrete. You can have peace of mind knowing that our professional team is dedicated to providing a safe and efficient stripping and sealing service for your concrete surfaces.
• Q: Is it possible to apply penetrating concrete sealers over existing topical sealers?
• A: No, it is not possible to apply penetrating concrete sealers over existing topical sealers. Topical sealers create a membrane or film on the surface of the concrete, forming a barrier that prevents the penetrating sealers from effectively absorbing into the concrete. Therefore, before applying a penetrating sealer, it is necessary to remove any existing topical sealer to ensure proper penetration and adhesion of the new sealer. This preparation step ensures that the penetrating sealer can effectively provide the desired protection and enhance the durability of the concrete surface.

For More Questions

FAQs » Tile and Grout Cleaning » Cleaning Concrete Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software