1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Sealing »
4. Can_Tile_Cleaners_restore_my_floors_to_their_original,_like new_appearance

Frequently Asked Questions

Other FAQs :

• Q: What type of guarantee is provided with stone sealing services?
• A: Stone and grout sealing services do not typically come with guarantees. However, our Impregnating Water Based Sealers have a life expectancy of up to 10 years, which can vary based on factors such as the quality of the stone, level of foot traffic, and maintenance procedures implemented. It is important to understand that a sealer does not provide complete imperviousness to stains. Rather, it offers a reaction time to address spills. An unsealed floor can immediately stain, whereas a sealed floor is resistant to staining and provides a reaction time of up to 4-5 hours. A penetrating sealer sits just beneath the stone's surface, preventing spills from penetrating and causing staining. However, it cannot prevent etching or surface damage caused by acid-based spills like red wine, vinegar, urine, or fruit juice. Immediate cleaning of such spills is crucial to prevent permanent damage to the stone surface.
• Q: What are the reasons for cleaning your stone surface?
• A: Cleaning your stone surface is essential because natural stone products tend to harbor dirt, residues, dust, and grime within their pores. It is crucial to thoroughly clean these pores before applying any sealant to the surface. If dirt and other contaminants are trapped beneath the stone sealer, they can eventually lead to the formation of a milky white residue between the top of the stone and the underside of the sealer. To rectify this issue, it becomes necessary to remove the stone sealer and perform a thorough cleaning process.
• Q: What are the reasons for sealing a stone surface and when is the ideal time to do so?
• A: Sealing a stone surface is crucial to prevent immediate staining from spills and to protect against permanent damage. While sealing provides effective protection, it is important to clean up spills promptly. Different natural stone surfaces require specific sealing methods. For sandstone, terracotta, and limestone, it is recommended to seal them before they are laid and grouted. These materials are highly porous and can quickly absorb stained water from adhesives and grout. Terracotta, in particular, should be sealed on all sides before installation due to its high porosity. Limestone is also susceptible to staining, and caution should be exercised while handling it to avoid leaving finger marks that can later stain the surface. Granite, marble, slate, and travertine, on the other hand, are sealed on all edges and the top after they are laid and grouted. Thorough cleaning is essential prior to the sealing process for these types of floors.
• Q: Why do I still see marks on my polished marble/limestone/travertine even though it has been sealed?
• A: Even though your polished marble/limestone/travertine has been sealed, you may still notice marks on the surface. It's important to understand that these marks are often not stains but rather etches. Acid-sensitive stones, such as these, can be affected by any acid, which can lead to a loss of polish and the creation of a dull or frosty surface. For example, red wine can cause both a stain and an etch on unsealed stone, but on a sealed stone, only the etch may be visible. Penetrating sealers function by sitting below the surface of the stone, preventing acid from deeply penetrating and causing stubborn stains, but they may not fully protect against surface etching. Acid can come in various forms, such as fruit juices, wine, salad dressings, or even urine in bathroom settings, and can cause damage. The good news is that this type of damage can typically be repaired.
• Q: Efflorescence has built up on stone surfaces?
• A: Yes we can

For More Questions

FAQs » Stone Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software