1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Sandstone »
4. Stripping and Sealing »
5. What_is_a_sandstone_tiles_strip_and_seal

Frequently Asked Questions

Q: What is a sandstone tiles strip and seal? - Sandstone | Stripping and Sealing

• A: Sandstone tiles stripping and sealing is simply the process of stripping the coating off the sandstone floor before resealing it. Sandstone flooring can look dull and lifeless over time, making it look older and really bringing down the feel of the home. By stripping and resealing, you can bring back the beautiful, lustrous appearance of your sandstone and eliminate the cost of laying new flooring.

Other FAQs :

• Q: What can I expect in terms of mess during the stripping process of my granite tiles? Is there a risk of damaging my walls or skirting boards?
• A: When it comes to the stripping process of your granite tiles, Tile Cleaning prioritizes the use of high-quality non-solvent-based stripping and sealing products. These products are specifically designed to minimize mess and ensure the protection of your granite tiles and other surfaces in your home. With our current non-solvent-based strippers and techniques, there is no significant risk of damaging your walls or skirting boards. In rare cases, where solvent-based strippers may be required, we take extensive safety precautions and ensure that you are properly informed. If such circumstances arise, you may be required to vacate the premises for up to 48 hours to ensure your safety. Rest assured, we prioritize cleanliness and take every measure to safeguard your walls, skirting boards, and other areas of your home throughout the stripping process.
• Q: What is the recommended method for measuring the size of a sandstone area?
• A: We advise measuring each sandstone area individually. The easiest method is to multiply the width by the length of the area. For instance, if a room measures 3 meters in length and 2 meters in width, the total area would be calculated as 3 multiplied by 2, resulting in 6 square meters.
• Q: What measures can I take to maintain the fresh appearance of my sandstone tiles?
• A: To maintain the new look of your sandstone tiles, Tile Cleaning recommends weekly cleaning using a damp microfiber cloth and a mild detergent. This will effectively remove any dirt or grime from the surface. It is important to avoid using strong detergents or cleaners that are acidic or alkaline, as they can affect the sealer. Instead, opt for mild detergents and pH-neutral substances for safe cleaning. To provide the best protection against staining and make regular maintenance easier, we highly recommend sealing your sandstone tiles with one of our highest quality sealers. Sealing not only safeguards your tiles but also enhances their longevity and appearance.
• Q: What is the ideal timing for sealing my sandstone floors, and how can I determine if my sandstone floors currently require sealing?
• A: The optimal time to seal your sandstone tiles is right after installation to proactively protect them from potential staining and damage. To determine if your sandstone tiles currently require sealing, look out for signs such as patchy sealed areas on the floor or an increased susceptibility to staining. These indications suggest that the previous sealer may have worn off, making it necessary to reseal your sandstone tiles to maintain their appearance and safeguard them against potential stains.
• Q: What is the recommended frequency for sealing sandstone floors?
• A: The frequency of sealing sandstone floors can vary depending on factors such as the type of sealer used and the level of foot traffic they receive. In Australia, the Deepshield™ range of deep impregnating water-based sealers is recommended, with the Transparent Penetrating Sealer offering protection for up to 10 years. Topical sealers typically have a lifespan of around 3 years. However, high foot traffic or severe weather conditions can result in a shorter lifespan. It's also important to consider the condition of the tiles. If you notice patchy areas and increased susceptibility to staining, it's a sign that resealing is needed. For specific inquiries and assistance, feel free to reach out to us.

For More Questions

FAQs » Sandstone » Stripping and Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software