1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Sealing »
4. What_are_the_benefits_of_hiring_a_professional_to_seal_my_stone

Frequently Asked Questions

Q: What are the benefits of hiring a professional to seal my stone? - Stone Sealing

• A: Hiring a professional to seal your stone brings several advantages. Firstly, professionals have the expertise to select the appropriate sealer based on the type of stone and its specific needs. They ensure that the stone is thoroughly cleaned before sealing, removing any dirt or blemishes that could be trapped beneath the sealer. This ensures a clean and flawless surface for optimal sealing results. Professionals are knowledgeable about industry standards and best practices, ensuring that the sealing process is done correctly and effectively. By relying on a professional, you can have peace of mind knowing that your stone will be sealed properly, enhancing its appearance and providing long-lasting protection.

Other FAQs :

• Q: What can I expect in terms of the appearance of my floors after the cleaning and sealing process?
• A: If your grout (and stone, if applicable) have not been sealed previously, it is possible that certain stains, especially in high traffic areas, may be permanent. However, if your grout (and stone, if applicable) have been sealed previously, the cleaning process should have prevented the penetration of dirt and other contaminants. As a result, you can expect excellent results from the cleaning, leaving your floors looking refreshed and rejuvenated.
• Q: How many coats of sealer are typically applied to stone surfaces?
• A: The number of coats applied to your stone surfaces usually ranges from 2 to 4, depending on several factors, including the desired finish.
• Q: What are the reasons for sealing a stone surface and when is the ideal time to do so?
• A: Sealing a stone surface is crucial to prevent immediate staining from spills and to protect against permanent damage. While sealing provides effective protection, it is important to clean up spills promptly. Different natural stone surfaces require specific sealing methods. For sandstone, terracotta, and limestone, it is recommended to seal them before they are laid and grouted. These materials are highly porous and can quickly absorb stained water from adhesives and grout. Terracotta, in particular, should be sealed on all sides before installation due to its high porosity. Limestone is also susceptible to staining, and caution should be exercised while handling it to avoid leaving finger marks that can later stain the surface. Granite, marble, slate, and travertine, on the other hand, are sealed on all edges and the top after they are laid and grouted. Thorough cleaning is essential prior to the sealing process for these types of floors.
• Q: Efflorescence has built up on stone surfaces?
• A: Yes we can
• Q: How can I assess whether my stone surface has been adequately sealed?
• A: You can determine if your stone surface has been effectively sealed by conducting a water test. Pour a small amount of water onto the surface and observe its behavior. If the water is quickly absorbed into the surface, it indicates that the surface requires sealing as it is not adequately protected. However, if the water forms into small beads and remains on the surface without being absorbed, it suggests that the surface has been properly sealed and the sealer is providing the desired level of protection. This simple water test can help you assess the effectiveness of the seal and determine if any resealing is necessary to maintain the surface's protection and appearance.

For More Questions

FAQs » Stone Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software