huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Either phone or email us and we will arrange an appointment at your convenience. You will be asked questions such as do you have off road parking or an out side tap - neither is essential but the more information we have before visiting makes the demonstration run smoother.
Q: How do I arrange for you to come to site? - Sealing Ceramic Tiles | How_often_should_i_completely_reseal_my_tiles
Other FAQs :
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: Do I need any special equipment to clean my sealed floor?
- A: Our operator onsite can advise if your current cleaning equipment is appropriate.
For More QuestionsFAQs » Sealing Ceramic Tiles » How_often_should_i_completely_reseal_my_tiles
Client Range
huge range of tiles and surfaces in all locations including: