huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
Q: How does it achieve such a clean finish? - Sealing Ceramic Tiles | How_often_should_i_completely_reseal_my_tiles
Other FAQs :
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer. - Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
For More QuestionsFAQs » Sealing Ceramic Tiles » How_often_should_i_completely_reseal_my_tiles
Client Range
huge range of tiles and surfaces in all locations including: