huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: Which process can I expect when you arrive to reseal my quarry tile floors?
- A: Our professional team will go through the job processes with you step by step so you know exactly what you're getting. The process includes stripping any previous sealer if it was applied, the quarry tile is then thoroughly cleaned and neutralised so that it is free of dust, residue and anything else that can affect the new sealer. A new sealer is applied to the dry quarry tile floor and allowed to set. The newly sealed quarry tile floor will not only look new again, it will be protected and result in your quarry tile surfaces becoming easier to maintain.
- Q: How will you charge me for stripping and sealing my quarry tiles?
- A: Tile Cleaners® charge per square meter for each separate room. There is a price list on the Tile Cleaners® website for you to review. Before we begin our work we will measure each room individually, confirm the work to be carried out as well as confirm all costs with you.
- Q: Efflorescence has built up on my quarry tiles. Can you remove it?
- A: Yes we can. Efflorescence is a build up of salts and can be removed with efflorescence removers and other specialised cleaning techniques. Efflorescence is typically caused by a leakage behind the quarry tiles or through damaged grout lines. The efflorescence can be removed but it is important the cause of the efflorescence is resoled.
- Q: How often should I seal my quarry tile floors?
- A: It depends on the type of sealer used and the amount of foot traffic the quarry tiles are being exposed to. Australia's Deepshield® range of deep impregnating water based sealer's, offer long term benefits with Deepshield Gold® lasting up to 15 years. Topical sealer's have a life expectancy of around 3 years. If you have a high amount of foot traffic or perhaps severe weather conditions(for outdoor tiles), you may experience a shorter lifetime. Sealing your quarry tiles can also depend on the tiles condition. Once they start showing patchy areas and are staining easily then you should have them resealed. Give us a call and we can assist you with all your enquiries.
- Q: What can I do to keep my quarry tiles looking new?
- A: To keep your quarry tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the quarry surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended.
For More QuestionsFAQs » Quarry Tile » Tile and Grout Cleaning
Client Range
huge range of tiles and surfaces in all locations including: