1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Concrete »
4. Tile and Grout Cleaning »
5. What_is_the_recommended_method_for_measuring_the_size_of_a_concrete_area_for_the_purpose_of_determining_the_square_meterage

Frequently Asked Questions

Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage? - Concrete | Tile and Grout Cleaning

• A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.

Other FAQs :

• Q: Do the products used by Tile Cleaning contain any toxic ingredients?
• A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
• Q: What are the indicators that suggest it is time to clean, strip, and reseal polished concrete surfaces?
• A: You will know it's time to have your concrete floors stripped, cleaned and sealed once they begin to appear dull or "matte" even after you have given them an efficient regular clean. If you notice that your concrete surfaces are staining easily, it's a good indication that your previous sealer is wearing off and your concrete floors will need to be resealed immediately to prevent permanent staining.
• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: What are the reasons for considering the stripping of concrete floors?
• A: Stripping concrete floors is essential if you desire the cleanest and most visually appealing results. By entrusting the task to professionals, they can effectively remove as much of the old sealer as possible. This initial step paves the way for a thorough cleaning process before applying a new sealer. The end result is a fresh and immaculate polished concrete floor that showcases its natural beauty to the fullest extent. With professional stripping, cleaning, and sealing, your concrete floors can achieve their optimal appearance and maintain their pristine condition.
• Q: What is the estimated time required to polish concrete?
• A: The duration required to complete concrete polishing varies depending on the size of the area. For larger projects, such as expansive floors, it may take up to three days to complete the polishing process. On the other hand, polishing a smaller surface like a bench-top can typically be finished within half a day. Professional services like Tile Cleaners® strive to minimize disruptions by aiming to complete the work within the same day, ensuring your home or business experiences as little interruption as possible.

For More Questions

FAQs » Concrete » Tile and Grout Cleaning

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software