huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: The process is virtually dust free. There is no airborne dust due to the use of Hepa filter vacuum systems. There will be some residual dust left on the floor but it will be vacuumed up between steps by another filtered vacuum. A little dust is created when using hand held grinders, however this is removed between each grinding stage.
Q: How dusty is the polishing process? - Concrete | Polishing Natural Stone
Other FAQs :
- Q: Do you apply sealer to the floor?
- A: Polished concrete on its own is quite stain resistant, but many solutions can seep into the pores to create a stain, or even etch the floor. A sealer will line the pores to keep most stains suspended at the surface of the concrete, not allowing the stain to penetrate the floor and further preventing the likelihood of staining.
- Q: Will the process polish around edges, corners and other obsticles?
- A: It will be necessary to "hand" finish against fixed obstacles. Our technicians will do this during the process.
- Q: What are the recommended preparations I should undertake before the concrete sealing process?
- A: To prepare for the concrete sealing process, it is recommended to remove all furniture and items from the floor area. By ensuring that the floor is clear and free of any obstacles, it allows the Tile Cleaning team to access the entire surface easily and carry out the sealing process efficiently. Removing furniture and items beforehand also helps to protect them from any potential damage during the sealing process. By following this simple preparation step, you can help ensure a smooth and effective concrete sealing experience.
- Q: How soon can I use the floor after the polishing?
- A: Polished concrete flooring can be walked on during the grind and polish process. There is no 'cure' time since it is a mechanical process. If a sealer is used, 4 hours is typically required before foot traffic can be resumed.
- Q: Can the floor be brought back up if it gets dull?
- A: Yes and the best thing about it is that it will never be as involved as the initial process. Normally it will only take a couple of steps to reach the end result required.
For More QuestionsFAQs » Concrete » Polishing Natural Stone
Client Range
huge range of tiles and surfaces in all locations including:
Related Links
- Our Services
- Types of Tiles
- Types Of Stone Tiles
- Tile Cleaners
- Tile Sealers
- Tile Restoration
- Grout Cleaning
- Grout Cleaner
- Bathroom Tile Cleaning
- Bathroom Grout Cleaning
- Stone Tile Cleaning
- Quarry Cleaning
- Stone Sealing
- Sandstone Cleaning
- Sandstone Restoration
- Bluestone Cleaning
- Bluestone Sealing
- Bluestone Stripping & Sealing
- Bluestone Restoration
- Bluestone Grinding
- Bluestone Specialists
- Slate Cleaning & Sealing
- Slate Stripping & Sealing
- Outdoor Tile Cleaning
- Outdoor Tile Sealing
- Wood Waxing
- Commercial Tile Cleaning
- Stone Stain Removal
- Grout Colour Sealing
- Pressure Cleaning
- Natural Stone Restoration
- Tile & Grout Cleaners
- Anti Slip Coating
- Cleaning Efflorescence Off Floors
- How to Remove Solvent Sealer From Tile