1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Sealing Natural Stone »
4. Which_type_of_sealer_is_recommended_for_stone_surfaces

Frequently Asked Questions

Q: Which type of sealer is recommended for stone surfaces? - Sealing Natural Stone

• A: The appropriate type of sealer for your stone surfaces depends on the specific type of stone you have and its intended use. Different types of stones have varying porosity levels and characteristics, which may require different types of sealers to achieve optimal results. It is recommended to consult with a professional or refer to the manufacturer's guidelines to determine the most suitable sealer for your specific stone and intended application.

Other FAQs :

• Q: How long does the sealer need to dry for it to fully cure?
• A: The drying time required for a sealer to fully cure can vary depending on the specific product being used. In general, most sealers have a relatively quick drying time, with the surface becoming touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers typically complete their curing process within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is crucial to carefully follow the instructions provided by the manufacturer regarding the recommended drying time. Doing so ensures that the sealer properly sets and provides the intended level of protection. Adhering to the specified drying time will help guarantee the longevity and effectiveness of the sealer on your tiles.
• Q: Can penetrating sealers be applied over existing topical sealers?
• A: No, it is not possible to apply penetrating sealers over existing topical sealers. This is because topical sealers create a barrier on the surface of the material, preventing effective absorption of the penetrating sealer. To achieve the desired results, it is necessary to remove any existing topical sealer before applying a penetrating sealer. By removing the topical sealer, you allow the penetrating sealer to penetrate the material and provide the intended protection and benefits. Removing the topical sealer ensures the maximum effectiveness of the penetrating sealer and optimizes the overall sealing process.
• Q: Why do I need to strip my stone surfaces?
• A: If you want your stone to be its cleanest and looking its very best you need to have a professional remove as much of the old sealer as possible. Once this is done the cleaning process will be carried out and the new sealer applied. You will have the freshest and cleanest possible stone surfaces once we are finished with the process.
• Q: What is the purpose of using sealer and coating agents on stone?
• A: The idea of using sealers on stone surface is to prevent water from penetrating the porous structure of the stone, which eventually leads to stains, cracks, weathering, and deterioration. There are largely two types of chemical agents for stone cleaning.
• Q: What is the ideal timing for sealing my stone, and how can I determine if my stone requires sealing at present?
• A: It is highly recommended to seal your stone or grout immediately after installation to minimize the risk of accidental staining or damage. As for determining if your stone requires sealing at present, you can observe the presence of patchy sealed areas on the floor or an increased susceptibility to staining on the tiles. These signs indicate that resealing may be necessary to maintain the protection and appearance of your stone surfaces.

For More Questions

FAQs » Sealing Natural Stone

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software