1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Polishing Natural Stone »
4. Polishing Concrete Floors »
5. What_maintenance_steps_can_I_take_to_preserve_the_appearance_of_my_concrete_surfaces_and_keep_them_looking_new

Frequently Asked Questions

Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new? - Polishing Natural Stone | Polishing Concrete Floors

• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.

Other FAQs :

• Q: What is the recommended method for cleaning polished concrete surfaces?
• A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
• Q: Is coloured concrete and/or coloured aggregates available?
• A: When laying a new slab, a wide range of coloured concretes and coloured aggregates are available for you to choose from.
• Q: How dusty is the polishing process?
• A: The process is virtually dust free. There is no airborne dust due to the use of Hepa filter vacuum systems. There will be some residual dust left on the floor but it will be vacuumed up between steps by another filtered vacuum. A little dust is created when using hand held grinders, however this is removed between each grinding stage.
• Q: How long does it take for concrete sealer to dry?
• A: Most concrete sealers dry fairly quickly and are usually touch-dry after 4 hours. This is true of both penetrating and topical sealers. Penetrating sealers usually fully cure in 24 hours with topical sealers generally taking up to 48 hours to fully dry.
• Q: How do I measure the size of the concrete area?
• A: We recommend that you measure each concrete area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.

For More Questions

FAQs » Polishing Natural Stone » Polishing Concrete Floors

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software