huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Yes, however it is always best to use a pH neutral cleaner to suspend the dirt so it can be cleaned off the floor instead of just spread around on the floor and leaving a hazy film on the surface.
Q: Can we just use plain water to clean the floors? - Concrete | Polishing Natural Stone
Other FAQs :
- Q: How long does it take for concrete sealer to dry?
- A: Most concrete sealers dry fairly quickly and are usually touch-dry after 4 hours. This is true of both penetrating and topical sealers. Penetrating sealers usually fully cure in 24 hours with topical sealers generally taking up to 48 hours to fully dry.
- Q: Does sealing concrete surfaces help prevent efflorescence?
- A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.
- Q: Can the floor be brought back up if it gets dull?
- A: Yes and the best thing about it is that it will never be as involved as the initial process. Normally it will only take a couple of steps to reach the end result required.
- Q: Are any products used toxic?
- A: Here at Tile Cleaners® we understand the importance of your family's safety, which is why we prefer to use non-toxic finishing agents as we not only want to protect your polished concrete floors, but your families health too. Materials and agents that present potential health hazards are not in our product portfolio and never have been.
- Q: What is the optimal timing for sealing concrete, and how can I determine if my concrete surfaces require sealing at the present moment?
- A: The optimal time to seal your concrete is right after installation to provide immediate protection against staining and damage. As for determining if your concrete surfaces require sealing, there are a couple of indicators to look out for. Firstly, if you notice patchy areas on the floor where the sealant has worn off or is uneven, it is a clear sign that resealing is needed. Additionally, if your concrete is becoming more susceptible to staining and is no longer repelling liquids as effectively as before, it is a good indication that it is time to apply a fresh coat of sealer. By addressing these signs promptly, you can ensure that your concrete remains adequately protected and maintains its optimal appearance.
For More QuestionsFAQs » Concrete » Polishing Natural Stone
Client Range
huge range of tiles and surfaces in all locations including:
Related Links
- Our Services
- Types of Tiles
- Types Of Stone Tiles
- Tile Cleaners
- Tile Sealers
- Tile Restoration
- Grout Cleaning
- Grout Cleaner
- Bathroom Tile Cleaning
- Bathroom Grout Cleaning
- Stone Tile Cleaning
- Quarry Cleaning
- Stone Sealing
- Sandstone Cleaning
- Sandstone Restoration
- Bluestone Cleaning
- Bluestone Sealing
- Bluestone Stripping & Sealing
- Bluestone Restoration
- Bluestone Grinding
- Bluestone Specialists
- Slate Cleaning & Sealing
- Slate Stripping & Sealing
- Outdoor Tile Cleaning
- Outdoor Tile Sealing
- Wood Waxing
- Commercial Tile Cleaning
- Stone Stain Removal
- Grout Colour Sealing
- Pressure Cleaning
- Natural Stone Restoration
- Tile & Grout Cleaners
- Anti Slip Coating
- Cleaning Efflorescence Off Floors
- How to Remove Solvent Sealer From Tile