1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Sealing »
4. Sealing Limestone Tiles »
5. What_is_the_recommended_method_for_measuring_the_area_of_limestone_that_requires_sealing

Frequently Asked Questions

Other FAQs :

• Q: What is the significance of having my limestone tiles sealed?
• A: Sealing limestone tiles is highly important for their protection and longevity. Unlike polishes, sealers are specifically formulated to prevent liquids and dirt particles from penetrating the natural stone. It is crucial to have your limestone tiles sealed, ideally when they are first installed. This initial sealing can provide effective protection for up to 15 years. To ensure the preservation of your limestone floors and prevent any accidental permanent damage, it is advisable to contact us promptly after the installation so that we can apply the necessary sealant and safeguard them from potential harm.
• Q: What is the drying time for my limestone tiles?
• A: The drying process for your limestone tiles involves two stages. The first stage is when the tiles become touch dry, which typically takes approximately 4 hours. However, for the sealer to fully cure and reach its optimal effectiveness, it generally requires a period of 24 hours. Once the sealer has fully cured, you can safely place everything back in its original position. It is important to note that during this 24-hour period, it is advisable to avoid placing any heavy objects, such as furniture, directly on the tiles and grout to prevent potential damage.
• Q: How can I determine if my limestone floors require sealing?
• A: Tile Cleaners® recommends performing a straightforward "water test" to assess the need for sealing your limestone floors. This test, widely recognized in the stone industry, can help you determine whether your floors require sealing. To conduct the test, place a few drops of water on the limestone surface and allow them to remain for approximately 10 to 30 minutes. Afterward, wipe the water dry. If the stone did not darken during this process, it indicates that your limestone is adequately sealed and does not require further sealing. However, if the water caused the stone to darken, it suggests that the water was able to penetrate the stone, indicating the need for sealing to protect the limestone properly.
• Q: What is the recommended method for measuring the area of limestone that requires sealing?
• A: For accurate measurement of the area that needs sealing, we advise measuring each individual limestone area separately. The most straightforward method is to multiply the width by the length of each area. As an illustration, if a room measures 3 meters in length and 2 meters in width, the total area would be calculated as 3 X 2 = 6m2. This approach ensures precise measurements and allows for an accurate estimation of the sealing requirements for your limestone surfaces.
• Q: What is acid etching and what preventive measures can be taken to protect limestone against it?
• A: Exposure to acidic substances poses a risk of etching or corrosion to limestone tiles, as they can be easily affected by such compounds. Protecting limestone against acid attack can be challenging as sealing may not offer complete resistance. However, the most effective approach to safeguarding your limestone tiles is to promptly seal them and clean up any spills without delay. Given the high porosity of stone-based tiles, sealing becomes essential in providing protection against potential acid attacks and liquid spills in the future.

For More Questions

FAQs » Tile and Grout Sealing » Sealing Limestone Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software