1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Sealing »
4. Sealing Concrete Floors »
5. What_are_the_reasons_for_considering_the_stripping_of_concrete_floors

Frequently Asked Questions

Q: What are the reasons for considering the stripping of concrete floors? - Tile and Grout Sealing | Sealing Concrete Floors

• A: Stripping concrete floors is essential if you desire the cleanest and most visually appealing results. By entrusting the task to professionals, they can effectively remove as much of the old sealer as possible. This initial step paves the way for a thorough cleaning process before applying a new sealer. The end result is a fresh and immaculate polished concrete floor that showcases its natural beauty to the fullest extent. With professional stripping, cleaning, and sealing, your concrete floors can achieve their optimal appearance and maintain their pristine condition.

Other FAQs :

• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
• Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage?
• A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.
• Q: What are the potential consequences of not sealing concrete floors?
• A: Not sealing concrete floors can lead to various potential consequences. Without proper sealing, the surface of the concrete is susceptible to damage. Spills of oily or harsh substances can penetrate the pores of the concrete, resulting in permanent stains that cannot be removed through regular domestic cleaning methods. By not sealing your concrete surfaces, you risk permanent staining and difficulty in maintaining the fresh look and feel of the floors. Sealing the concrete provides a protective barrier, preventing such staining and accidental damage in the future. It helps to preserve the appearance of the surfaces, keeping them in their best condition for a longer period and making maintenance easier and more convenient.
• Q: Does sealing concrete surfaces help prevent efflorescence?
• A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.

For More Questions

FAQs » Tile and Grout Sealing » Sealing Concrete Floors

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software