1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Sealing »
4. Sealing Ceramic Tiles »
5. How_can_I_determine_the_right_time_to_seal_my_tiles,_and_what_are_the_signs_that_indicate_my_tiles_are_in_need_of_sealing

Frequently Asked Questions

Other FAQs :

• Q: How long does the sealer need to dry for it to fully cure?
• A: The drying time required for a sealer to fully cure can vary depending on the specific product being used. In general, most sealers have a relatively quick drying time, with the surface becoming touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers typically complete their curing process within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is crucial to carefully follow the instructions provided by the manufacturer regarding the recommended drying time. Doing so ensures that the sealer properly sets and provides the intended level of protection. Adhering to the specified drying time will help guarantee the longevity and effectiveness of the sealer on your tiles.
• Q: What are the advantages or purposes of sealing tiles and grout?
• A: Sealing tiles and grout is essential to protect them from various factors that can cause deterioration and impact their appearance. Foot traffic, UV rays, moisture, chemicals, oil, grease, acids, and salt are among the culprits that can lead to problems like cracking, pitting, scaling, spalling, delamination, dusting, discoloration, efflorescence, and salt damage. To address these issues effectively, it is recommended to seal your tiles and grout using high-quality products like Australia's Deepshield™ deep impregnating range of sealers. Sealing provides excellent maintenance benefits by preventing unsightly stains, safeguarding against discoloration, and ensuring that your tiled floors maintain their optimal condition for an extended period. Applying a reliable sealer enhances the longevity and appearance of your tiles and grout, allowing them to withstand the test of time while preserving their visual appeal.
• Q: What is the recommended method for cleaning a surface that has been sealed?
• A: To maintain a sealed surface effectively, it is recommended to use a pH neutral cleaner. This type of cleaner effectively removes dirt and grime without causing damage to the sealant. In case of spills, it is crucial to clean them promptly using clean water to prevent potential staining or residue. For regular maintenance and dust removal, using a microfiber mop is highly advised. The fine fibers of a microfiber mop efficiently capture dust particles, ensuring a clean and dust-free surface. By following these practices, you can help preserve the quality and appearance of your sealed surfaces.
• Q: How frequently should floors be sealed?
• A: The recommended frequency for sealing floors can vary depending on factors such as the type of sealer used and the amount of foot traffic on the tiles. Deep impregnating water-based sealers, like Deepshield™ Gold, are known to provide long-lasting protection for up to 15 years. However, topical sealers typically require reapplication every 3 years, although this can be influenced by factors such as heavy foot traffic or harsh weather conditions. Regular assessment of the floor's condition is important, looking for signs like patchy areas or increased susceptibility to staining, as these may indicate the need for resealing. For personalized guidance and more detailed information, it is recommended to consult professionals or providers such as Australia's Deepshield™ for assistance and inquiries.
• Q: How can I determine the right time to seal my tiles, and what are the signs that indicate my tiles are in need of sealing?
• A: To determine the appropriate timing for sealing tiles, it is beneficial to adopt a proactive approach and seal them immediately after installation to prevent potential staining or damage. However, if you are considering sealing existing tiles, there are indicators to look out for. Keep an eye out for patchy areas on the floor where the sealer has worn off, or observe if the tiles are becoming more vulnerable to staining. These signs suggest that resealing is necessary to preserve the appearance of the tiles and provide effective surface protection.

For More Questions

FAQs » Tile and Grout Sealing » Sealing Ceramic Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software