huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
Q: How do I maintain my sealed marble bench top? - Sealing Terracotta Tiles | What_is_the_suggested_approach_for_measuring_the_dimensions_of_a_terracotta_area
Other FAQs :
- Q: Do I need any special equipment to clean my sealed floor?
- A: Our operator onsite can advise if your current cleaning equipment is appropriate.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
For More QuestionsFAQs » Sealing Terracotta Tiles » What_is_the_suggested_approach_for_measuring_the_dimensions_of_a_terracotta_area
Client Range
huge range of tiles and surfaces in all locations including: