huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Mop up spillage immediately with warm soapy water.
Q: What do I do if red wine spills on my sealed floor? - Sealing Slate Tiles | Does_the_application_of_sealer_make_slate_floors_slippery
Other FAQs :
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer. - Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
For More QuestionsFAQs » Sealing Slate Tiles » Does_the_application_of_sealer_make_slate_floors_slippery
Client Range
huge range of tiles and surfaces in all locations including: