huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer. - Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: Who do you carry out the work for?
- A: Our customers include both private and commercial customers. Hotel groups and Leisure facilities make up a large amount of our work but we have cleaned stadiums, public toilets and miles and miles of tiles in private houses. These can be man made porcelain and ceramic or natural stone.
For More QuestionsFAQs » Sealing Ceramic Tiles » Which_type_of_sealer_is_recommended_for_tiles
Client Range
huge range of tiles and surfaces in all locations including: