huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
Q: How does it achieve such a clean finish? - Sealing Ceramic Tiles | What_steps_or_preparations_are_typically_recommended_before_having_a_floor_sealed
Other FAQs :
- Q: What do I do if red wine spills on my sealed floor?
- A: Mop up spillage immediately with warm soapy water.
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: Do I need any special equipment to clean my sealed floor?
- A: Our operator onsite can advise if your current cleaning equipment is appropriate.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
For More QuestionsFAQs » Sealing Ceramic Tiles » What_steps_or_preparations_are_typically_recommended_before_having_a_floor_sealed
Client Range
huge range of tiles and surfaces in all locations including: