huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
Q: Can I use Vinegar to clean my sealed stone floors and bench tops? - Sealing Ceramic Tiles | What_safety_precautions_or_potential_risks_should_be_considered_during_the_process_of_stripping_and_sealing_surfaces
Other FAQs :
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What do I do if red wine spills on my sealed floor?
- A: Mop up spillage immediately with warm soapy water.
For More QuestionsFAQs » Sealing Ceramic Tiles » What_safety_precautions_or_potential_risks_should_be_considered_during_the_process_of_stripping_and_sealing_surfaces
Client Range
huge range of tiles and surfaces in all locations including: