huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
Q: What surfaces can the clean and capture system sanitise? - Sealing Ceramic Tiles | How_should_I_clean_my_sealed_surface
Other FAQs :
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
For More QuestionsFAQs » Sealing Ceramic Tiles » How_should_I_clean_my_sealed_surface
Client Range
huge range of tiles and surfaces in all locations including: