huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Either phone or email us and we will arrange an appointment at your convenience. You will be asked questions such as do you have off road parking or an out side tap - neither is essential but the more information we have before visiting makes the demonstration run smoother.
Q: How do I arrange for you to come to site? - Sealing Ceramic Tiles | How_frequently_should_floors_be_sealed
Other FAQs :
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer. - Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
For More QuestionsFAQs » Sealing Ceramic Tiles » How_frequently_should_floors_be_sealed
Client Range
huge range of tiles and surfaces in all locations including: