huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Tile Cleaners® charge per square meter for each separate Donnybrook Stone area. There is a price list on the Tile Cleaners® website for you to review. Before we begin our work we will measure each room individually, confirm the work to be carried out as well as confirm all costs with you.
Q: How will you charge me for sealing my Donnybrook Stone tiles? - Donnybrook | Tile and Grout Sealing
Other FAQs :
- Q: Are there different types of sealer for Donnybrook Stone?
- A: Yes, here at Tile Cleaners® we provide a variety of top quality sealers to seal your Donnybrook Stone, whether you choose to use an Impregnating Sealer or a Topical Sealer depending on your needs.
- Q: How long does it take for my Donnybrook Stone tiles to dry?
- A: It takes 4 hours to be touch dry and normally 24 hours for the sealer to fully cure, which is when you can put everything back into place. Nothing hard such as furniture can be moved on to the tiles and grout for at least 24 hours.
- Q: What can I do to keep my Donnybrook Stone looking new after sealing?
- A: To keep your Donnybrook Stone and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the Donnybrook Stone surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended. Our best advice to protect your Donnybrook Stone is to seal them with one of our highest quality sealers. This is the best protection your Donnybrook Stone can receive against staining.
- Q: How do I know if my Donnybrook Stone floors need sealing?
- A: Tile Cleaners® advise a "water test". First you need to place a few drops of water on your stone and let it set for around 10 to 30 minutes then wipe it dry. If your stone did not darken, it means your Donnybrook Stone is perfectly sealed and does not require sealing, but if it has darkened, it means that the water was able to penetrate your stone and sealing is required.
- Q: How long does it take to reseal my Donnybrook Stone floors?
- A: It all depends on the size of the area that we are sealing but most jobs take 4 - 8 hours to complete. We do cleaning and resealing in the same day so you don't have to fuss with more than one appointment.
For More QuestionsFAQs » Donnybrook » Tile and Grout Sealing
Client Range
huge range of tiles and surfaces in all locations including: