huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Immediately wipe up spillage with warm soapy water before it dries.
Q: If we have a spillage on our newly sealed floor what should we do? - Cleaning Slate Tiles | Does_Tile_Cleaning_offer_assistance_with_moving_furniture_when_sealing_the_floor
Other FAQs :
- Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
For More QuestionsFAQs » Cleaning Slate Tiles » Does_Tile_Cleaning_offer_assistance_with_moving_furniture_when_sealing_the_floor
Client Range
huge range of tiles and surfaces in all locations including: