huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Mechanical, dry-grind concrete polishing is a fairly clean process, grinding will create a slurry, and can get a bit messy, but with the dry-grind process, a vacuum system is used in conjunction with the grinder to contain 98% of the airborne particles. The remainder of the dust is then easily swept up and removed in plastic bags.
Q: Is polishing concrete messy? - Concrete | Polishing Natural Stone
Other FAQs :
- Q: How slippery is polished concrete?
- A: Many suspect a highly polished concrete floor would become more slippery-and thus more of a problem. Contrary to common perception, the degree of polish or shine is not directly related to slip resistance. Just because polished concrete is shiny doesn't mean it is slippery. If the right processes are applied both internally and/or externally, testing has shown that polished concrete will meet or exceed Australia/New Zealand standards for slip resistance. (Please bear in mind any floor finish can become slippery when wet.)
- Q: Is it possible to apply penetrating concrete sealers over existing topical sealers?
- A: No, it is not possible to apply penetrating concrete sealers over existing topical sealers. Topical sealers create a membrane or film on the surface of the concrete, forming a barrier that prevents the penetrating sealers from effectively absorbing into the concrete. Therefore, before applying a penetrating sealer, it is necessary to remove any existing topical sealer to ensure proper penetration and adhesion of the new sealer. This preparation step ensures that the penetrating sealer can effectively provide the desired protection and enhance the durability of the concrete surface.
- Q: Can you polish existing concrete?
- A: In most cases yes we can. The concrete would have to be in very poor condition not to be able to achieve a polished concrete finish.
- Q: When is the best time for concrete to be polished after pouring a new slab?
- A: As a general rule, concrete should be allowed to cure for 28 days prior to grinding.
- Q: What is the optimal timing for sealing concrete, and how can I determine if my concrete surfaces require sealing at the present moment?
- A: The optimal time to seal your concrete is right after installation to provide immediate protection against staining and damage. As for determining if your concrete surfaces require sealing, there are a couple of indicators to look out for. Firstly, if you notice patchy areas on the floor where the sealant has worn off or is uneven, it is a clear sign that resealing is needed. Additionally, if your concrete is becoming more susceptible to staining and is no longer repelling liquids as effectively as before, it is a good indication that it is time to apply a fresh coat of sealer. By addressing these signs promptly, you can ensure that your concrete remains adequately protected and maintains its optimal appearance.
For More QuestionsFAQs » Concrete » Polishing Natural Stone
Client Range
huge range of tiles and surfaces in all locations including:
Related Links
- Our Services
- Types of Tiles
- Types Of Stone Tiles
- Tile Cleaners
- Tile Sealers
- Tile Restoration
- Grout Cleaning
- Grout Cleaner
- Bathroom Tile Cleaning
- Bathroom Grout Cleaning
- Stone Tile Cleaning
- Quarry Cleaning
- Stone Sealing
- Sandstone Cleaning
- Sandstone Restoration
- Bluestone Cleaning
- Bluestone Sealing
- Bluestone Stripping & Sealing
- Bluestone Restoration
- Bluestone Grinding
- Bluestone Specialists
- Slate Cleaning & Sealing
- Slate Stripping & Sealing
- Outdoor Tile Cleaning
- Outdoor Tile Sealing
- Wood Waxing
- Commercial Tile Cleaning
- Stone Stain Removal
- Grout Colour Sealing
- Pressure Cleaning
- Natural Stone Restoration
- Tile & Grout Cleaners
- Anti Slip Coating
- Cleaning Efflorescence Off Floors
- How to Remove Solvent Sealer From Tile