huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer.
For More QuestionsFAQs » Sealing Travertine Tiles » What_type_of_sealer_is_applied_by_Tile_Cleaners%C2%AE?_Will_it_have_any_impact_on_the_texture_of_my_travertine_tiles?
Client Range
huge range of tiles and surfaces in all locations including: