huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
For More QuestionsFAQs » Sealing Ceramic Tiles » What_happens_if_I_don't_seal_my_floors
Client Range
huge range of tiles and surfaces in all locations including: