huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What is the difference between honing and grinding?
- A: Grinding refers to the removal of large amounts of material from the surface of the stone. Grinding is used to remove deep scratches and staining as well as lippage(uneven surface) thereby smoothing out the surface of the area making it uniform. Honing is the smoothing of the stone, not as aggressive as grinding and removes very little material from the stone, giving a matte(not glossy as with polishing) look to the surface.
- Q: Can grinding damage marble?
- A: Tile Cleaners® technicians use the highest quality machinery providing the best solutions without compromising your surfaces. Tile Cleaners® prides itself on specifically catering for each tile variety and each situation with the highest degree of care. Stone based tiles are usually more porous requiring more attention than man made tiles, which is why its extremely important to use correct products and equipment in order to restore your tiles to their best possible condition.
- Q: Will grinding remove the sealer from my marble?
- A: Yes, the mechanical resurfacing process used to grind your floors will remove all coatings, resulting in your floors being in an "as new" condition. Once honed or polished, you should reseal your surfaces with a deep penetrating, impregnating sealer, which avoids staining and will reduce the effect of soiling.
- Q: Some areas I want to have ground are in smaller hard to reach places?
- A: In areas that cannot be reached by larger floor grinding machines, the grinding can be done using hand held polishing machines.
- Q: What is the typical process for measuring the size of the area in floor sealing services?
- A: When measuring the size of an area for floor sealing services, it is typically done by measuring each section individually. The process involves multiplying the width by the length of each section to calculate the area. For example, if a room has dimensions of 3 meters in length and 2 meters in width, the total area can be determined by multiplying 3 meters by 2 meters, resulting in a total of 6 square meters. This method ensures accurate measurement and calculation of the area size for proper pricing and service planning.
For More QuestionsFAQs » Grinding Natural Stone » Grinding Marble Tiles
Client Range
huge range of tiles and surfaces in all locations including: