1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Ceramic »
4. Tile and Grout Sealing »
5. What_are_the_advantages_or_purposes_of_sealing_tiles_and_grout

Frequently Asked Questions

Q: What are the advantages or purposes of sealing tiles and grout? - Ceramic | Tile and Grout Sealing

• A: Sealing tiles and grout is essential to protect them from various factors that can cause deterioration and impact their appearance. Foot traffic, UV rays, moisture, chemicals, oil, grease, acids, and salt are among the culprits that can lead to problems like cracking, pitting, scaling, spalling, delamination, dusting, discoloration, efflorescence, and salt damage. To address these issues effectively, it is recommended to seal your tiles and grout using high-quality products like Australia's Deepshield™ deep impregnating range of sealers. Sealing provides excellent maintenance benefits by preventing unsightly stains, safeguarding against discoloration, and ensuring that your tiled floors maintain their optimal condition for an extended period. Applying a reliable sealer enhances the longevity and appearance of your tiles and grout, allowing them to withstand the test of time while preserving their visual appeal.

Other FAQs :

• Q: How often should tiles be fully resealed?
• A: The recommended frequency for fully resealing tiles can vary depending on factors such as the type and quality of the sealer used and the expected lifespan of the sealer. It is advised to regularly assess the condition of the tiles and evaluate the effectiveness of the existing sealer. If there are visible signs of wear, staining, or diminished protection, it may be necessary to undertake a complete resealing process. The specific timing for resealing will depend on these factors, and it is important to consistently monitor the tile's condition and consult the manufacturer's guidelines or sealer recommendations to determine the appropriate intervals for full resealing.
• Q: Do the products used by Tile Cleaning contain any toxic ingredients?
• A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
• Q: What is the recommended method for cleaning a surface that has been sealed?
• A: To maintain a sealed surface effectively, it is recommended to use a pH neutral cleaner. This type of cleaner effectively removes dirt and grime without causing damage to the sealant. In case of spills, it is crucial to clean them promptly using clean water to prevent potential staining or residue. For regular maintenance and dust removal, using a microfiber mop is highly advised. The fine fibers of a microfiber mop efficiently capture dust particles, ensuring a clean and dust-free surface. By following these practices, you can help preserve the quality and appearance of your sealed surfaces.
• Q: What is the purpose or rationale behind performing floor stripping?
• A: The purpose of floor stripping is to achieve the cleanest and most visually appealing results for your floors. When professionals perform this task, their objective is to meticulously remove the old sealer, ensuring a thorough process. This stripping sets the foundation for an effective cleaning procedure, followed by the application of a fresh sealer. By following this meticulous approach, the surfaces are revitalized, resulting in a pristine and immaculate appearance. Ultimately, the floor stripping process aims to deliver the freshest and cleanest outcome for your floors.
• Q: What is the typical process for measuring the size of the area in floor sealing services?
• A: When measuring the size of an area for floor sealing services, it is typically done by measuring each section individually. The process involves multiplying the width by the length of each section to calculate the area. For example, if a room has dimensions of 3 meters in length and 2 meters in width, the total area can be determined by multiplying 3 meters by 2 meters, resulting in a total of 6 square meters. This method ensures accurate measurement and calculation of the area size for proper pricing and service planning.

For More Questions

FAQs » Ceramic » Tile and Grout Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software