huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How can I determine the right time to seal my tiles, and what are the signs that indicate my tiles are in need of sealing?
- A: To determine the appropriate timing for sealing tiles, it is beneficial to adopt a proactive approach and seal them immediately after installation to prevent potential staining or damage. However, if you are considering sealing existing tiles, there are indicators to look out for. Keep an eye out for patchy areas on the floor where the sealer has worn off, or observe if the tiles are becoming more vulnerable to staining. These signs suggest that resealing is necessary to preserve the appearance of the tiles and provide effective surface protection.
- Q: Do the products used by Tile Cleaning contain any toxic ingredients?
- A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
- Q: What is the typical process for measuring the size of the area in floor sealing services?
- A: When measuring the size of an area for floor sealing services, it is typically done by measuring each section individually. The process involves multiplying the width by the length of each section to calculate the area. For example, if a room has dimensions of 3 meters in length and 2 meters in width, the total area can be determined by multiplying 3 meters by 2 meters, resulting in a total of 6 square meters. This method ensures accurate measurement and calculation of the area size for proper pricing and service planning.
- Q: What is the recommended method for cleaning a surface that has been sealed?
- A: To maintain a sealed surface effectively, it is recommended to use a pH neutral cleaner. This type of cleaner effectively removes dirt and grime without causing damage to the sealant. In case of spills, it is crucial to clean them promptly using clean water to prevent potential staining or residue. For regular maintenance and dust removal, using a microfiber mop is highly advised. The fine fibers of a microfiber mop efficiently capture dust particles, ensuring a clean and dust-free surface. By following these practices, you can help preserve the quality and appearance of your sealed surfaces.
- Q: What can one expect during the floor sealing process when professionals arrive?
- A: When our professional team arrives to seal your floors, you can expect a thorough and transparent process. We will provide you with a comprehensive overview of the entire process, ensuring effective communication. The sealing process typically begins with the potential removal of any previous sealer, if necessary. The floor will then undergo meticulous cleaning and neutralization to eliminate dust, residues, and other substances that could affect the performance of the new sealer. Afterward, a fresh layer of sealer will be applied, allowing sufficient time for it to set and cure properly. This will restore your floors to their original appearance while providing enhanced protection. Additionally, the sealed floor will be easier to maintain, reducing the effort required for routine cleaning and upkeep.
For More QuestionsFAQs » Ceramic » Tile and Grout Sealing
Client Range
huge range of tiles and surfaces in all locations including: