huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: Why is it important for me to have my bluestone tiles sealed?
- A: Sealers are different from polishes and are actually designed to keep liquids and dirt particles from sinking into the natural stone. It is extremely important to have your bluestone tiles sealed. All bluestone tiles should be sealed when they are first installed; this initial seal can last up to 15 years. It is important to call us as soon as your bluestone floors are installed so we can protect them before any accidental permanent damage occurs.
- Q: What can I do to keep my bluestone tiles looking new after sealing them?
- A: To keep your bluestone tiles and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the bluestone surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended. Our best advice to protect your bluestone tiles is to seal them with one of our highest quality sealers. This is the best protection your bluestone tiles can receive against staining.
- Q: What is the usual lifespan of the sealer before it requires reapplication?
- A: The lifespan of a sealer before reapplication is influenced by the type of sealer used. Topical sealers typically provide protection for approximately 3 years before requiring reapplication. In contrast, impregnating sealers are more durable and can last up to 15 years or even a lifetime when applied to vertical surfaces. However, areas with high foot traffic or frequent use may necessitate more frequent inspections and resealing to ensure ongoing protection. Conducting a water absorption test can help assess the porosity of the surface and aid in selecting a sealer with longer-lasting durability. It is advisable to refer to the guidelines provided by the manufacturer and consult professionals to determine the specific reapplication schedule suitable for your tiles and grout.
- Q: How long does it take for my bluestone tiles to dry?
- A: It takes 4 hours to be touch dry and normally 24 hours for the sealer to fully cure, which is when you can put everything back into place. Nothing hard such as furniture can be moved on to the tiles and grout for at least 24 hours.
- Q: How do I measure the size of the area of bluestone I need sealed?
- A: We recommend that you measure each bluestone area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
For More QuestionsFAQs » Bluestone » Tile and Grout Sealing
Client Range
huge range of tiles and surfaces in all locations including: