1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Sealing »
4. Sealing Slate Tiles »
5. What_does_the_term_

Frequently Asked Questions

Other FAQs :

• Q: What is the appropriate method for measuring the size of the slate area that requires sealing?
• A: To accurately measure the area of slate that requires sealing, we suggest measuring each slate area separately. The most straightforward method is to multiply the width by the length of each area. For instance, if a room measures 3 meters in length and 2 meters in width, the total area would be calculated as 3 X 2 = 6m². By measuring each slate area individually using this method, you can determine the precise measurement needed for the sealing service.
• Q: Does the application of sealer make slate floors slippery?
• A: When it comes to the slipperiness of slate floors, the application of Deepshield™ Impregnating Penetrating Sealer does not have any impact. This is because the sealer penetrates the top layer of the slate, leaving the surface unaffected in terms of slipperiness. However, it should be noted that using a topical sealer on slate floors may result in increased slipperiness when the surface is wet. To maintain both the appearance and slip resistance of your slate floors, it is advisable to seal them with a high-quality, invisible, and fully breathable impregnating sealer. By choosing this type of sealer, you can prevent moisture from being trapped within the stone, ensuring the longevity and safety of your slate floors.
• Q: What is the pricing method for the sealing of my slate tiles?
• A: Tile Cleaners® utilizes a per square meter pricing model for the sealing of each distinct slate room. You can find a detailed price list on the Tile Cleaners® website for your reference. Prior to commencing the work, our team will conduct measurements for each room individually. We will then confirm the scope of the work to be carried out and provide you with a comprehensive cost breakdown, ensuring transparency and clarity regarding all expenses involved.
• Q: What is the estimated drying time for slate tiles?
• A: Following the application of the sealer, you can anticipate that the slate tiles will be touch dry within approximately 4 hours. However, it is essential to allow a full 24 hours for the sealer to completely cure. This is the recommended timeframe for ensuring optimal effectiveness. During this curing period, it is important to refrain from placing any heavy or hard objects, including furniture, on the tiles and grout. It is advisable to wait at least 24 hours before moving or placing any items back onto the treated surface to avoid compromising the sealer's integrity.
• Q: What is the significance of having my slate tiles sealed?
• A: Having your slate tiles sealed is of utmost importance. Unlike polishes, sealers are specifically formulated to prevent liquids and dirt particles from penetrating the natural stone. It is highly recommended to seal all slate tiles right after they are installed. This initial seal, when applied with a high-quality sealer, can provide protection for up to 15 years. To ensure the longevity and durability of your slate floors, it is essential to contact us promptly after the installation so that we can apply the necessary sealant and safeguard them against any accidental permanent damage.

For More Questions

FAQs » Tile and Grout Sealing » Sealing Slate Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software