huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: Do the products used by Tile Cleaning contain any toxic ingredients?
- A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
- Q: What does the process of concrete strip and seal involve?
- A: Concrete strip and seal is a process that involves removing the existing coating or sealant from the concrete floor and then resealing it. Over time, concrete floors can become dull and lose their lustrous appearance, giving them an aged and unattractive look. By performing a strip and seal procedure, the old coating is stripped off, and a new sealant is applied, bringing back the beautiful and glossy appearance of the polished concrete. This process not only restores the aesthetic appeal of the floor but also eliminates the need for costly floor replacement. By opting for concrete strip and seal, you can revitalize your concrete floors and give them a fresh, new look without the expense of installing new flooring.
- Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage?
- A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.
- Q: What are the reasons for considering the sealing of concrete surfaces?
- A: Sealing concrete surfaces is essential due to various factors that can cause deterioration and a decline in their appearance. Concrete is exposed to traffic, UV rays, moisture, rain, chemicals, and impurities like oil, gas, grease, acids, and salt, which can lead to common issues such as cracking, pitting, scaling, spalling, delamination, dusting, discoloration, efflorescence, and salt damage. By applying a concrete sealer, you can protect the surface and enjoy numerous maintenance benefits. High-quality sealers like Australia's Deepshield™ deep impregnating sealers provide effective protection and help maintain the integrity and aesthetics of the concrete surfaces.
- Q: What is the optimal timing for sealing concrete, and how can I determine if my concrete surfaces require sealing at the present moment?
- A: The optimal time to seal your concrete is right after installation to provide immediate protection against staining and damage. As for determining if your concrete surfaces require sealing, there are a couple of indicators to look out for. Firstly, if you notice patchy areas on the floor where the sealant has worn off or is uneven, it is a clear sign that resealing is needed. Additionally, if your concrete is becoming more susceptible to staining and is no longer repelling liquids as effectively as before, it is a good indication that it is time to apply a fresh coat of sealer. By addressing these signs promptly, you can ensure that your concrete remains adequately protected and maintains its optimal appearance.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including: