huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What are the reasons for considering the sealing of concrete surfaces?
- A: Sealing concrete surfaces is essential due to various factors that can cause deterioration and a decline in their appearance. Concrete is exposed to traffic, UV rays, moisture, rain, chemicals, and impurities like oil, gas, grease, acids, and salt, which can lead to common issues such as cracking, pitting, scaling, spalling, delamination, dusting, discoloration, efflorescence, and salt damage. By applying a concrete sealer, you can protect the surface and enjoy numerous maintenance benefits. High-quality sealers like Australia's Deepshield™ deep impregnating sealers provide effective protection and help maintain the integrity and aesthetics of the concrete surfaces.
- Q: What is the estimated drying time for concrete sealer?
- A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
- Q: What is the recommended method for cleaning polished concrete surfaces?
- A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
- Q: What are the indicators that suggest it is time to clean, strip, and reseal polished concrete surfaces?
- A: You will know it's time to have your concrete floors stripped, cleaned and sealed once they begin to appear dull or "matte" even after you have given them an efficient regular clean. If you notice that your concrete surfaces are staining easily, it's a good indication that your previous sealer is wearing off and your concrete floors will need to be resealed immediately to prevent permanent staining.
- Q: What are the recommended preparations I should undertake before the concrete sealing process?
- A: To prepare for the concrete sealing process, it is recommended to remove all furniture and items from the floor area. By ensuring that the floor is clear and free of any obstacles, it allows the Tile Cleaning team to access the entire surface easily and carry out the sealing process efficiently. Removing furniture and items beforehand also helps to protect them from any potential damage during the sealing process. By following this simple preparation step, you can help ensure a smooth and effective concrete sealing experience.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including: