1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Stone Cleaning »
4. What_different_types_of_tiles_do_Tile_Cleaners%c2%ae_clean

Frequently Asked Questions

Other FAQs :

• Q: What steps should I take to maintain my floors after they have been cleaned and sealed?
• A: The technician who performs the cleaning and sealing of your floors will provide you with personalized maintenance advice specific to your tiled area. In general, we recommend using a mild cleaner, such as Spirit "Neutral Cleaner," at least once a week to keep your tiled floors well-maintained. Tiles with a textured surface may benefit from using a doodlebug instead of a mop for a more effective clean. It is important to avoid the use of harsh chemicals as they can diminish the longevity of the sealers. Additionally, when mopping, remember to change the water frequently to prevent spreading dirty water across your floors.
• Q: What should I do to prepare for the stone cleaning?
• A: Move all furniture and items off the floor so it is ready for when we arrive.
• Q: Why do I still see marks on my polished marble/limestone/travertine even though it has been sealed?
• A: Even though your polished marble/limestone/travertine has been sealed, you may still notice marks on the surface. It's important to understand that these marks are often not stains but rather etches. Acid-sensitive stones, such as these, can be affected by any acid, which can lead to a loss of polish and the creation of a dull or frosty surface. For example, red wine can cause both a stain and an etch on unsealed stone, but on a sealed stone, only the etch may be visible. Penetrating sealers function by sitting below the surface of the stone, preventing acid from deeply penetrating and causing stubborn stains, but they may not fully protect against surface etching. Acid can come in various forms, such as fruit juices, wine, salad dressings, or even urine in bathroom settings, and can cause damage. The good news is that this type of damage can typically be repaired.
• Q: Can Tile Cleaners restore my floors to their original, like-new appearance?
• A: If your grout (and stone, if applicable) have not been sealed before, it is possible that certain stains, especially in high-traffic areas, may be permanent. However, if your grout (and stone, if applicable) have been previously sealed, the sealing should have prevented the penetration of dirt and other contaminants, resulting in an excellent outcome after cleaning.
• Q: Why should I seal my stone surface and when?
• A: Natural surfaces are subject to deterioration and degradation of appearance through traffic, UV rays, moisture, rain, chemicals, and other impurities such as oil, gas, grease, acids and salt. This can easily result in common problems such as cracking, pitting, scaling, spalling, delamination, dusting, discolouration, efflorescence, salt damage, etc. Sealing offers excellent maintenance benefits when quality products are used such as Australia's Deepshield™ deep impregnating sealers. Sealing a stone surface will provide effective protection against permanent damage but spills should still be cleaned up as quickly as possible.

For More Questions

FAQs » Stone Cleaning

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software