huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Yes we can. Efflorescence is a build up of salts and can be removed with efflorescence removers and other specialised cleaning techniques. Efflorescence is typically caused by a leakage behind the quarry tiles or through damaged grout lines. The efflorescence can be removed but it is important the cause of the efflorescence is resoled.
Q: Efflorescence has built up on my quarry tiles. Can you remove it? - Quarry Tile | Tile and Grout Cleaning
Other FAQs :
- Q: How often should I seal my quarry tile floors?
- A: It depends on the type of sealer used and the amount of foot traffic the quarry tiles are being exposed to. Australia's Deepshield® range of deep impregnating water based sealer's, offer long term benefits with Deepshield Gold® lasting up to 15 years. Topical sealer's have a life expectancy of around 3 years. If you have a high amount of foot traffic or perhaps severe weather conditions(for outdoor tiles), you may experience a shorter lifetime. Sealing your quarry tiles can also depend on the tiles condition. Once they start showing patchy areas and are staining easily then you should have them resealed. Give us a call and we can assist you with all your enquiries.
- Q: When is the best time to seal my quarry tile floors and how do I know that mine need sealing now?
- A: The best time to have your quarry tiles sealed is immediately after installation to prevent any accidental staining or damage. You will know that your quarry tiles need sealing once you start noticing patchy sealed areas of the floor and/or your quarry tiles are staining easier.
- Q: Will sealing my quarry tiles prevent efflorescence?
- A: Efflorescence is a problem that quarry tiles and most porous tiles can face. It's the tendency of the water in the tiles to bring salts from the material to the surface as it evaporates. The water evaporates leaving the salts on the surface resulting in a whitish coating and ruining its finish. The only way to avoid this problem is to seal your quarry tiles with one of our highest quality water resistant sealer's and to stop the source of the water that is penetrating the tiles, for example a water pipe leak or damaged grout.
- Q: How do I measure the size of the quarry tile area?
- A: We recommend that you measure each area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
- Q: Does Tile Cleaning offer assistance with moving furniture when sealing the floor?
- A: Tile Cleaning provides assistance with moving furniture during the floor sealing process. Their team of dedicated technicians is available to help with the relocation of furniture items that can be reasonably managed by one person, such as those with wheels or lightweight furniture like tables and chairs. However, it is important to keep in mind that while Tile Cleaning takes precautions to protect your belongings, they cannot be held responsible for any damages that may occur during the furniture moving process. To ensure the safety of valuable or fragile items, it is recommended to either relocate them to a secure area or properly secure them before the technicians arrive. By taking these necessary precautions, you can help ensure the safety of your furniture and minimize the risk of potential damage while the floor sealing process is being carried out.
For More QuestionsFAQs » Quarry Tile » Tile and Grout Cleaning
Client Range
huge range of tiles and surfaces in all locations including: