1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Limestone »
4. Tile and Grout Sealing »
5. Do_you_offer_color_enhancing_services_for_travertine?_If_yes,_could_you_provide_an_explanation_of_the_process_involved_in_color_enhancement?

Frequently Asked Questions

Other FAQs :

• Q: What is the recommended method for measuring the area of limestone that requires sealing?
• A: For accurate measurement of the area that needs sealing, we advise measuring each individual limestone area separately. The most straightforward method is to multiply the width by the length of each area. As an illustration, if a room measures 3 meters in length and 2 meters in width, the total area would be calculated as 3 X 2 = 6m2. This approach ensures precise measurements and allows for an accurate estimation of the sealing requirements for your limestone surfaces.
• Q: What is acid etching and what preventive measures can be taken to protect limestone against it?
• A: Exposure to acidic substances poses a risk of etching or corrosion to limestone tiles, as they can be easily affected by such compounds. Protecting limestone against acid attack can be challenging as sealing may not offer complete resistance. However, the most effective approach to safeguarding your limestone tiles is to promptly seal them and clean up any spills without delay. Given the high porosity of stone-based tiles, sealing becomes essential in providing protection against potential acid attacks and liquid spills in the future.
• Q: What is the drying time for my limestone tiles?
• A: The drying process for your limestone tiles involves two stages. The first stage is when the tiles become touch dry, which typically takes approximately 4 hours. However, for the sealer to fully cure and reach its optimal effectiveness, it generally requires a period of 24 hours. Once the sealer has fully cured, you can safely place everything back in its original position. It is important to note that during this 24-hour period, it is advisable to avoid placing any heavy objects, such as furniture, directly on the tiles and grout to prevent potential damage.
• Q: How can I determine if my limestone floors require sealing?
• A: Tile Cleaners® recommends performing a straightforward "water test" to assess the need for sealing your limestone floors. This test, widely recognized in the stone industry, can help you determine whether your floors require sealing. To conduct the test, place a few drops of water on the limestone surface and allow them to remain for approximately 10 to 30 minutes. Afterward, wipe the water dry. If the stone did not darken during this process, it indicates that your limestone is adequately sealed and does not require further sealing. However, if the water caused the stone to darken, it suggests that the water was able to penetrate the stone, indicating the need for sealing to protect the limestone properly.
• Q: Which sealer is considered the most suitable for sealing limestone pavers around swimming pools?
• A: When it comes to sealing limestone pavers around swimming pools, our top recommendation is our high-quality Impregnating Penetrating Water Based Sealer. This specific sealer is designed to provide comprehensive protection to the limestone pavers, penetrating deep into the stone to ensure effective and long-lasting results. One notable advantage of this sealer is its ability to eliminate the slipperiness that can be associated with other sealers used on limestone pavers. By opting for our Impregnating Penetrating Water Based Sealer, you can confidently protect your limestone pavers around the pool area while ensuring enhanced safety and durability.

For More Questions

FAQs » Limestone » Tile and Grout Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software