1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Concrete »
4. Tile and Grout Sealing »
5. What_can_I_expect_in_terms_of_mess_during_the_stripping_and_sealing_process_of_terracotta_tiles,_and_is_there_a_risk_of_damaging_walls_or_skirting_boards

Frequently Asked Questions

Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards? - Concrete | Tile and Grout Sealing

• A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.

Other FAQs :

• Q: What is the recommended method for cleaning polished concrete surfaces?
• A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
• Q: What are the potential consequences of not sealing concrete surfaces?
• A: Concrete is a porous material that readily absorbs liquids. In freeze-thaw climates, the expansion of frozen liquids can destroy the surface of unsealed concrete. Oil, salt, fertiliser, and other household chemicals can discolour and damage unsealed concrete.
• Q: Is it possible to apply penetrating concrete sealers over existing topical sealers?
• A: No, it is not possible to apply penetrating concrete sealers over existing topical sealers. Topical sealers create a membrane or film on the surface of the concrete, forming a barrier that prevents the penetrating sealers from effectively absorbing into the concrete. Therefore, before applying a penetrating sealer, it is necessary to remove any existing topical sealer to ensure proper penetration and adhesion of the new sealer. This preparation step ensures that the penetrating sealer can effectively provide the desired protection and enhance the durability of the concrete surface.

For More Questions

FAQs » Concrete » Tile and Grout Sealing

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software