huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What is the recommended method for cleaning polished concrete surfaces?
- A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
- Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
- A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
- Q: What is the recommended method for measuring the size of a concrete area for the purpose of determining the square meterage?
- A: To accurately measure the size of a concreted area, we recommend measuring each area separately. The process is straightforward: multiply the width of the area by its length. For example, if you have a room that is 3 meters long and 2 meters wide, the total square meterage would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters in total. By measuring each concreted area individually using this method, you can ensure accurate calculations of square meterage for pricing and other purposes.
- Q: What are the potential consequences if concrete floors are not sealed?
- A: If concrete floors are not sealed, they are more susceptible to damage. Spills of oily or harsh substances can easily penetrate the surface and leave permanent stains that are difficult to remove using regular cleaning methods. We strongly advise sealing your concrete surfaces to maintain their fresh appearance, provide protection against permanent staining, and prevent potential accidental damage. By sealing your concrete floors, they will retain their optimal condition for a longer period and will be easier to clean and maintain, offering convenience and peace of mind.
- Q: What is the estimated drying time for concrete sealer?
- A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
For More QuestionsFAQs » Concrete » Tile and Grout Cleaning
Client Range
huge range of tiles and surfaces in all locations including: