1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Concrete »
4. Tile and Grout Cleaning »
5. Do_the_products_used_by_Tile_Cleaning_contain_any_toxic_ingredients

Frequently Asked Questions

Other FAQs :

• Q: What are the recommended preparations I should undertake before the concrete sealing process?
• A: To prepare for the concrete sealing process, it is recommended to remove all furniture and items from the floor area. By ensuring that the floor is clear and free of any obstacles, it allows the Tile Cleaning team to access the entire surface easily and carry out the sealing process efficiently. Removing furniture and items beforehand also helps to protect them from any potential damage during the sealing process. By following this simple preparation step, you can help ensure a smooth and effective concrete sealing experience.
• Q: What is the estimated drying time for concrete sealer?
• A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: What is the optimal timing for sealing concrete, and how can I determine if my concrete surfaces require sealing at the present moment?
• A: The optimal time to seal your concrete is right after installation to provide immediate protection against staining and damage. As for determining if your concrete surfaces require sealing, there are a couple of indicators to look out for. Firstly, if you notice patchy areas on the floor where the sealant has worn off or is uneven, it is a clear sign that resealing is needed. Additionally, if your concrete is becoming more susceptible to staining and is no longer repelling liquids as effectively as before, it is a good indication that it is time to apply a fresh coat of sealer. By addressing these signs promptly, you can ensure that your concrete remains adequately protected and maintains its optimal appearance.
• Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards?
• A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.

For More Questions

FAQs » Concrete » Tile and Grout Cleaning

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software