huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
Q: How often does my sealed surface need re application? - Outdoor Tile Cleaning | Which_process_can_I_expect_when_you_arrive_to_seal_my_floors
Other FAQs :
- Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
- A: Vinegar is an acid based product and will burn or etch a polished stone surface.
- Q: What do I do if red wine spills on my sealed floor?
- A: Mop up spillage immediately with warm soapy water.
- Q: How do I clean my sealed floor?
- A:
Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer. - Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
- Q: How does it achieve such a clean finish?
- A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
For More QuestionsFAQs » Outdoor Tile Cleaning » Which_process_can_I_expect_when_you_arrive_to_seal_my_floors
Client Range
huge range of tiles and surfaces in all locations including: