huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving? - Cleaning Slate Tiles | Is_it_safe_to_get_my_slate_tiles_cleaned_and_sealed
Other FAQs :
- Q: If we have a spillage on our newly sealed floor what should we do?
- A: Immediately wipe up spillage with warm soapy water before it dries.
- Q: How much does it cost to have my floor cleaned?
- A:
The price depends on a number of variables. These include the size of the area, the type of material being cleaned and finally how dirty the floor is. Clean Tile and Grout carry out all their work following a demonstration when a fixed price is given to the customer. The customer then knows what to expect the whole floor to look like once cleaned and the price.
There are also a number of treatments including sealing, enhancing, and colour sealing of the grout. - Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: What do I do if red wine spills on my sealed floor?
- A: Mop up spillage immediately with warm soapy water.
For More QuestionsFAQs » Cleaning Slate Tiles » Is_it_safe_to_get_my_slate_tiles_cleaned_and_sealed
Client Range
huge range of tiles and surfaces in all locations including: