huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What do I do if red wine spills on my sealed floor?
- A: Mop up spillage immediately with warm soapy water.
- Q: How do I maintain my sealed marble bench top?
- A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
- Q: What surfaces can the clean and capture system sanitise?
- A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
- Q: How often does my sealed surface need re application?
- A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
- Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
- A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
For More QuestionsFAQs » Cleaning Slate Tiles » Do_the_products_used_by_Tile_Cleaning_contain_any_toxic_ingredients
Client Range
huge range of tiles and surfaces in all locations including: