huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: When is the best time to seal marble floors, and what are the indicators that suggest my marble floors are in need of sealing?
- A: The best time to seal marble floors is immediately after installation to provide proactive protection against accidental staining or damage. To determine if your marble floors require sealing, look for patchy areas on the floor where the sealant may have worn off. Additionally, if you notice that the marble tiles are becoming more susceptible to staining, it indicates that the existing sealer has deteriorated, and resealing is necessary to maintain the integrity and appearance of your marble floors. By addressing these signs promptly, you can ensure the long-term beauty and protection of your marble floors.
- Q: What is the estimated time required to reseal my marble floors?
- A: The duration of resealing your marble floors varies depending on the size of the area being sealed. Typically, most jobs can be completed within 4 to 8 hours. To ensure convenience, we perform both the cleaning and resealing on the same day, eliminating the need for multiple appointments.
- Q: What is the proper method for measuring the area of marble that needs to be sealed?
- A: To accurately measure the area of marble that requires sealing, it is best to measure each individual area separately. This can be done by multiplying the width of the area by its length. For instance, if you have a room that is 3 meters long and 2 meters wide, the total area would be calculated as 3 meters multiplied by 2 meters, resulting in 6 square meters (6m²). This method ensures precise measurements for determining the amount of marble that needs to be sealed.
- Q: What steps should I take to prepare my marble floors before the sealing process?
- A: Before our arrival, it is important to remove all furniture and items from your marble floors. This preparation ensures that the floors are clear and ready for the sealing process when we begin our work.
- Q: How can I determine if my marble floors require sealing?
- A: Tile Cleaning recommends conducting a simple "water test" to assess whether your marble floors necessitate sealing. This widely recognized test in the stone industry involves placing a few drops of water on the stone surface and allowing it to remain for approximately 10 to 30 minutes. Subsequently, wipe the water dry. If the marble did not darken during this process, it indicates that your marble is adequately sealed and does not require further sealing. However, if the water caused darkening of the marble, it signifies that the water was able to penetrate the stone, indicating the need for sealing.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Marble Tiles
Client Range
huge range of tiles and surfaces in all locations including: