huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: How can I determine if my marble floors require sealing?
- A: Tile Cleaning recommends conducting a simple "water test" to assess whether your marble floors necessitate sealing. This widely recognized test in the stone industry involves placing a few drops of water on the stone surface and allowing it to remain for approximately 10 to 30 minutes. Subsequently, wipe the water dry. If the marble did not darken during this process, it indicates that your marble is adequately sealed and does not require further sealing. However, if the water caused darkening of the marble, it signifies that the water was able to penetrate the stone, indicating the need for sealing.
- Q: How often should marble floors be sealed according to the recommended frequency?
- A: The recommended frequency for sealing marble floors depends on various factors, including the type of sealer used and the level of foot traffic the tiles experience. In Australia, the Deepshield® range offers deep impregnating water-based sealers, with Deepshield Gold® specifically designed for denser materials like marble and granite, providing protection for up to 15 years. Topical sealers typically last around 3 years. However, if your marble floors endure heavy foot traffic or are exposed to severe weather conditions (in the case of outdoor tiles), the lifespan of the sealer may be shorter. It is also important to consider the condition of the tiles. If you notice patchy areas and an increased susceptibility to staining, it may indicate that resealing is necessary. For further inquiries, please don't hesitate to contact our team, who will be delighted to assist you.
- Q: What is the drying time for marble tiles?
- A: Marble tiles typically take approximately 4 hours to become touch dry after the sealing process. However, it is recommended to allow a full 24 hours for the sealer to fully cure before placing any objects or furniture back onto the tiles. During this curing period, it is important to refrain from moving any heavy items onto the tiles or grout to prevent any potential damage.
- Q: Does the application of sealer make marble floors slippery?
- A: The Deepshield™ Impregnating Penetrating Sealer, which we use, does not affect the slipperiness of your marble floors. This sealer penetrates the top layer of your marble, maintaining its original slip resistance. However, it's worth noting that some topical sealers may potentially make the marble floors slippery when wet. To preserve both the appearance and slip resistance of your marble while preventing moisture damage, we suggest sealing your surfaces with a high-quality, invisible, and fully breathable impregnating sealer.
- Q: What is the estimated time required to reseal my marble floors?
- A: The duration of resealing your marble floors varies depending on the size of the area being sealed. Typically, most jobs can be completed within 4 to 8 hours. To ensure convenience, we perform both the cleaning and resealing on the same day, eliminating the need for multiple appointments.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Marble Tiles
Client Range
huge range of tiles and surfaces in all locations including: