huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
- A: We recommend that you measure each Donnybrook Stone area separately. The simplest way to measure is by multiplying the width by the length. For example a room that is 3 meters long and 2 meters wide is 3 X 2 = 6m2 in total.
Q: How do I measure the size of the area of Donnybrook Stone I need sealed? - Tile and Grout Sealing | Sealing Donnybrook Stone
Other FAQs :
- Q: What does the term "sealer" refer to?
- A: When we talk about a "sealer," we are referring to a liquid or carrier that contains a resin. This substance is applied to porous surfaces, whether they are natural stone or man-made materials. The primary function of a sealer is to provide protection against staining caused by water and/or oil-based materials. By applying the sealer, you can prevent these substances from penetrating and staining the surface. Additionally, a sealer can enhance the overall cleaning results by making it easier to clean and maintain the surfaces effectively.
- Q: What is the best sealer to use for my Donnybrook Stone pavers around my pool?
- A: The best sealer to use for Donnybrook Stone pavers around the pool is our high quality Impregnating Penetrating Water Based Sealer that protects your stone to the core and eliminates the slipperiness factor other sealers can create with Donnybrook Stone pavers.
- Q: What can I do to keep my Donnybrook Stone looking new after sealing?
- A: To keep your Donnybrook Stone and grout looking new, Tile Cleaners® recommend cleaning each week with a mild detergent to remove any dirt or grime from the Donnybrook Stone surface. Strong detergents(strong acid or alkali) may affect the sealer, mild detergents and pH neutral substances are strongly recommended. Our best advice to protect your Donnybrook Stone is to seal them with one of our highest quality sealers. This is the best protection your Donnybrook Stone can receive against staining.
- Q: What is the process I can expect when you come to seal my Donnybrook Stone floors?
- A: Our professional team will go through the job processes with you step by step so you know exactly what you're getting. The process includes stripping any previous sealer if applied, the Donnybrook Stone is then thoroughly cleaned and neutralised so that it is free of dust, residue and anything else that can affect the new sealer. A new sealer is applied to the dry Donnybrook Stone and allowed to set. The newly sealed Donnybrook Stone will not only look new again, it will be protected and result in your Donnybrook Stone becoming easier to maintain.
- Q: How do I know if my Donnybrook Stone floors need sealing?
- A: Tile Cleaners® advise a "water test". First you need to place a few drops of water on your stone and let it set for around 10 to 30 minutes then wipe it dry. If your stone did not darken, it means your Donnybrook Stone is perfectly sealed and does not require sealing, but if it has darkened, it means that the water was able to penetrate your stone and sealing is required.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Donnybrook Stone
Client Range
huge range of tiles and surfaces in all locations including: