huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What does the process of concrete strip and seal involve?
- A: Concrete strip and seal is a process that involves removing the existing coating or sealant from the concrete floor and then resealing it. Over time, concrete floors can become dull and lose their lustrous appearance, giving them an aged and unattractive look. By performing a strip and seal procedure, the old coating is stripped off, and a new sealant is applied, bringing back the beautiful and glossy appearance of the polished concrete. This process not only restores the aesthetic appeal of the floor but also eliminates the need for costly floor replacement. By opting for concrete strip and seal, you can revitalize your concrete floors and give them a fresh, new look without the expense of installing new flooring.
- Q: Do the products used by Tile Cleaning contain any toxic ingredients?
- A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
- Q: What is the estimated drying time for concrete sealer?
- A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
- Q: What is the recommended method for cleaning polished concrete surfaces?
- A: To maintain the condition of your polished concrete, it is recommended to clean it using a pH-neutral cleaner. This type of cleaner is gentle and does not damage the polished surface. After applying the pH-neutral cleaner, rinse the area with clean water to remove any residue. In case of spills, it is advisable to promptly clean them up using clean water. Additionally, to eliminate dust and keep the surface clean, using a microfiber mop is recommended. This method of cleaning helps to preserve the polished appearance of the concrete while ensuring that it remains free from dirt and debris.
- Q: Can Tile Cleaners remove efflorescence buildup from concrete surfaces?
- A: Certainly! Tile Cleaners has the expertise to remove efflorescence from concrete surfaces. Efflorescence, which is the buildup of salts, can be effectively treated using specialized cleaning techniques and efflorescence removers. It is crucial to address the underlying cause of efflorescence, which is often a leak behind the concrete or damaged grout lines. While efflorescence can be removed, it is essential to resolve the root cause to prevent its recurrence. By engaging professional services, you can have the efflorescence removed and ensure that steps are taken to rectify the underlying issue, helping to restore the appearance of your concrete surfaces.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including: