huge range of tiles and surfaces in all locations including:
Frequently Asked Questions
Other FAQs :
- Q: What is the estimated drying time for concrete sealer?
- A: Concrete sealers typically have a relatively quick drying time, and they are often touch-dry within approximately 4 hours. This applies to both penetrating sealers and topical sealers. Penetrating sealers usually reach full curing within 24 hours, while topical sealers may take up to 48 hours to fully dry. It is important to allow sufficient time for the sealer to dry and cure properly before subjecting the concrete surface to heavy use or exposure to water. By following the recommended drying times, you can ensure the effectiveness and longevity of the concrete sealer.
- Q: What are the potential consequences of not sealing concrete surfaces?
- A: Concrete is a porous material that readily absorbs liquids. In freeze-thaw climates, the expansion of frozen liquids can destroy the surface of unsealed concrete. Oil, salt, fertiliser, and other household chemicals can discolour and damage unsealed concrete.
- Q: What does the process of concrete strip and seal involve?
- A: Concrete strip and seal is a process that involves removing the existing coating or sealant from the concrete floor and then resealing it. Over time, concrete floors can become dull and lose their lustrous appearance, giving them an aged and unattractive look. By performing a strip and seal procedure, the old coating is stripped off, and a new sealant is applied, bringing back the beautiful and glossy appearance of the polished concrete. This process not only restores the aesthetic appeal of the floor but also eliminates the need for costly floor replacement. By opting for concrete strip and seal, you can revitalize your concrete floors and give them a fresh, new look without the expense of installing new flooring.
- Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards?
- A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.
- Q: Do the products used by Tile Cleaning contain any toxic ingredients?
- A: Tile Cleaning places a strong emphasis on the safety of your family during the cleaning process. They ensure that only non-toxic finishing agents are used, eliminating the presence of any potentially harmful substances or ingredients. Tile Cleaning takes great care in selecting cleaning products, specifically excluding any ingredients that could pose health risks. This commitment to safety not only helps preserve the condition of your stone tiles but also reflects Tile Cleaning's dedication to prioritizing the overall health and safety of your household. By choosing Tile Cleaning, you can have peace of mind knowing that the products used in the cleaning process are free from toxic ingredients.
For More QuestionsFAQs » Tile and Grout Sealing » Sealing Concrete Floors
Client Range
huge range of tiles and surfaces in all locations including: