1300 771 201

Availability for emergency

1. Home »
2. faqs »
3. Tile and Grout Cleaning »
4. Cleaning Concrete Tiles »
5. How_long_does_it_take_for_the_concrete_sealer_to_dry

Frequently Asked Questions

Other FAQs :

• Q: What can I expect in terms of mess during the stripping and sealing process of terracotta tiles, and is there a risk of damaging walls or skirting boards?
• A: At Tile Cleaning, we take great care to minimize mess during the stripping and sealing process of terracotta tiles. Our approach involves using high-quality, non-solvent-based stripping and sealing products, which are designed to ensure a clean and tidy process. These products are specifically selected to minimize the risk of damaging your floors, walls, or skirting boards. Our team of technicians is trained to handle the process with utmost care, ensuring that your surfaces are protected throughout. In most cases, non-solvent-based strippers and techniques are used, which effectively achieve excellent results without causing any harm. However, in rare circumstances where solvent-based strippers are necessary, additional precautions may be taken. This could involve temporarily vacating the premises for up to 48 hours to ensure safety and provide optimal protection. Rest assured that our experienced technicians will take all necessary measures to maintain a clean and damage-free environment during the stripping and sealing process.
• Q: What is the recommended frequency for sealing polished concrete floors?
• A: The recommended frequency for sealing polished concrete floors depends on factors such as the type of sealer used and the amount of foot traffic the floors are exposed to. Australia's Deepshield™ range of deep impregnating water-based sealers, for instance, offers long-term benefits, with Deepshield™ Gold providing protection for up to 15 years. On the other hand, topical sealers typically have a lifespan of around 3 years. However, it is important to note that high foot traffic or severe weather conditions, especially for outdoor concrete, can potentially shorten the lifespan of the sealer. Additionally, the condition of the surface plays a role in determining when resealing is necessary. If you notice patchy areas or the floors are staining easily, it may be a sign that resealing is needed. Feel free to contact us for further assistance and any inquiries you may have regarding sealing your polished concrete floors.
• Q: What maintenance steps can I take to preserve the appearance of my concrete surfaces and keep them looking new?
• A: To maintain the fresh and new appearance of your concrete surfaces, Tile Cleaners® recommends regular cleaning using a mild detergent. This weekly cleaning routine helps remove dirt and grime from the concrete surface, keeping it looking clean and well-maintained. It is important to note that strong detergents with high acidity or alkalinity can potentially affect the sealer applied to the concrete. Therefore, it is strongly advised to use mild detergents and pH-neutral substances when cleaning the surfaces. By following these maintenance guidelines, you can effectively preserve the pristine condition of your concrete and ensure its long-lasting beauty.
• Q: What does the process of concrete strip and seal involve?
• A: Concrete strip and seal is a process that involves removing the existing coating or sealant from the concrete floor and then resealing it. Over time, concrete floors can become dull and lose their lustrous appearance, giving them an aged and unattractive look. By performing a strip and seal procedure, the old coating is stripped off, and a new sealant is applied, bringing back the beautiful and glossy appearance of the polished concrete. This process not only restores the aesthetic appeal of the floor but also eliminates the need for costly floor replacement. By opting for concrete strip and seal, you can revitalize your concrete floors and give them a fresh, new look without the expense of installing new flooring.
• Q: Does sealing concrete surfaces help prevent efflorescence?
• A: Efflorescence can occur on concrete and other porous surfaces when water in the concrete brings salts to the surface as it evaporates. This process leaves behind a whitish coating that can mar the finish of the concrete. Sealing the concrete with a high-quality, water-resistant sealer can help mitigate efflorescence to some extent. However, it is important to address the underlying issue causing the water penetration, such as a water pipe leak or damaged grout, in order to fully prevent efflorescence. By sealing the concrete and resolving any sources of water infiltration, you can minimize the occurrence of efflorescence and help maintain the aesthetic integrity of your concrete surfaces.

For More Questions

FAQs » Tile and Grout Cleaning » Cleaning Concrete Tiles

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software